Roll Bending Plate Bending Machine SBS: Built for Long Plates up to 8000 mm

Some jobs call for length, not just force. Long cylinders for pipes, ducts, tanks and silo shells need a machine that can handle plates several metres wide. The SBS roll bending plate bending machine by SBFM Machinery is shown in the product photo with a clear label: for thickness 8 mm and length 8000 mm. That makes it a long-format rolling machine for thin to medium plate.

Quick Product Facts

• Product: Roll Bending Plate Bending Machines
• Product code: SBS
• Manufacturer: SBFM Machinery, Konya, Türkiye
• Category: Other
• Plate thickness: 8 mm (as stated in the product image)
• Plate length: 8000 mm (as stated in the product image; confirm that this is the working length)
• Design: Long machine with a large top roll, safety frame and hydraulic cylinders, as seen in the photo

What Is a Roll Bending Plate Bending Machine?

A roll bending machine, also called a plate rolling machine, forms flat plate into cylinders, cones and curved sections. The plate passes between rolls, and the roll positions set the radius. Repeated passes with adjusted settings bring the plate to the required curve.

The SBS product code is also used for other SBFM roll bending models, such as three-roll and four-roll machines. Because the listing does not state the roll arrangement, please confirm with SBFM which layout this machine uses.

What the Photo Shows

The photograph shows a very long, light-grey machine with a wide blue stripe and a heavy cylindrical top roll. Yellow-and-black safety frames run above and around the rolls, and hydraulic cylinders stand along the front. Two people stand at the right end, a small group that gives a sense of the machine's scale. The printed note reads "Roll bending machine by SBFM, for thickness: 8 mm / lenght: 8000 mm". These numbers are taken from the image; the exact rated capacity, minimum bending diameter and yield strength basis should be confirmed with the manufacturer.

Key Features and Benefits

• Long working length; 8000 mm, as stated in the image, for long cylinders and panels.
• Thin-to-medium plate capacity; 8 mm thickness, as stated in the image.
• Heavy top roll; a large-diameter roll helps resist deflection over long lengths.
• Hydraulic cylinders; visible in the photo, supporting controlled roll movement.
• Safety frames; yellow-and-black guards help protect operators near the rolls.
• Fewer welded seams; long plates can be rolled in one piece instead of joining short sections.
• Built in Konya; designed, machined, assembled and tested by SBFM.

Applications

• Long pipe and duct sections.
• Tank and silo shells.
• Chimney and stack sections.
• Wind tower and pole components.
• Pressure vessel shells.
• General fabrication workshops that roll long plates.

Tips for Rolling Long Plates

Support long plates properly so they do not sag before or after the rolls. Check the plate for straight edges, because a crooked blank rolls into a twisted cylinder. Bend in several light passes and measure the radius with a template. Keep the rolls clean to avoid marking the plate.

Part of a Complete Sheet Metal Forming Range

SBFM Machinery has built sheet metal forming machines in Konya since 1998. Alongside roll bending plate bending machines, our range includes hydraulic dishing presses, flanging machines, profile and pipe bending machines, polishing machines for dished ends, corrugated furnace machines and special corrugated and grooved rolls.

Why Choose SBFM Machinery?

Machines are designed, cut, welded, machined, assembled and tested in our own facilities, and our quality policy rests on customer satisfaction. We believe we grow together with our customers, so we listen first and recommend the model that fits your work, not simply the largest one. Technical guidance and spare parts help keep your machine productive for years.

How to Choose the Right Machine

• Define the longest plate and the thickest plate you will roll.
• Decide between three-roll and four-roll layouts for your parts.
• State the material and its yield strength.
• Note the smallest cylinder diameter you need.
• Plan floor space, crane access and plate handling for 8 m lengths.
• Ask SBFM for the data sheet, options and delivery time.

Maintenance for Long Service Life

Check hydraulic oil level, hoses and cylinders regularly and change filters as the manual advises. Keep the rolls clean and lubricate bearings and moving parts. Inspect safety frames and guards before each shift. Check alignment of long rolls from time to time, since accurate alignment helps keep long cylinders straight.

Frequently Asked Questions

What plate size can it roll? The product image states 8 mm thickness and 8000 mm length. Please confirm the exact working capacity and material grade with SBFM.

Is it a three-roll or four-roll machine? The listing does not say. SBFM offers both layouts under the SBS code, so please ask which one this model uses.

Can it roll thicker plate? Capacity depends on width, material and roll diameter. Send us your plate data and we will recommend a suitable model.

Request a Quote on MachineWorld.biz

Need to roll long plates with confidence? Contact us at +90 542 479 69 00 or export@MachineWorld.biz, or explore SBFM machines on MachineWorld.biz and request your quote today.

Long plates. Straight cylinders. Request a quote today.

ROLL BENDING  PLATE BENDING MACHINES